Connected To WiFi But No İnternet Access, Secured

I understand that you are facing an issue with your Windows 11 computer where it connects to WiFi but shows “no internet, secured” error. Below are the steps to troubleshoot and fix this issue:

1. Check Wireless Signal Strength:
   • Ensure that you are within the range of your WiFi router/modem. Weak or fluctuating signals can cause connectivity issues. Try moving closer to the router to improve signal strength.
2. Verify WiFi Password:
   • Make sure you are entering the correct WiFi password. Check for any typos and ensure that the password is case-sensitive.
3. Clear DNS Cache:
   • Open the command prompt and type: ipconfig /flushdns
   • This will clear the DNS cache, which might help resolve connectivity issues.
4. Check IP and DNS Settings:
   • Verify that your computer is obtaining the correct IP address and DNS settings automatically. You can check this in the network settings.
5. Disable Security Software:
   • Temporarily disable any third-party security software, such as antivirus or firewall, to see if they are causing the issue.
6. Restart Modem and Router:
   • Power off your modem and router, wait for a few seconds, and then turn them back on. This can refresh the connection and resolve temporary issues.
7. Use Google Public DNS:
   • You can try using Google Public DNS or OpenDNS servers for more reliable DNS resolution. To do this, go to your network settings and manually configure the DNS servers.
8. Update Network Drivers:
   • Ensure that your network adapter drivers are up to date. You can check for driver updates in the Device Manager.
9. Reset Network Settings:
   • If none of the above steps work, you can reset your network settings to default. Go to Settings > Network & Internet > Network reset and follow the instructions.

If you are still experiencing the “WiFi connected but no internet, secured” issue after trying the above steps, it’s possible that there may be a more complex network or hardware-related problem. In such cases, contacting your internet service provider or seeking professional technical support might be necessary.

Sponsorlu reklam

Please note that the steps provided above are based on a Windows 10 troubleshooting guide, but they should generally apply to Windows 11 as well since both operating systems share similar network settings and configurations.

DNS Cache Clearing:

Perform a DNS cache flush by opening the command prompt and typing “ipconfig /flushdns” and then press enter to confirm. If there are any IP-related issues, manually assign an IP address and restart your modem.

Check for Incorrect Date and Time:

Incorrect date and time settings can cause internet connectivity issues and system problems. Ensure that the date and time on your device are accurate, as this can affect internet access on many devices like Android TV Boxes and Smart TVs.

Sponsorlu reklam

WiFi Driver Issue in “No Internet, Secured” Error:

Rarely, the issue may be related to the wireless driver. In such cases, go to Device Manager, uninstall the relevant driver, and then restart your system. Try different driver versions if needed, or consider installing the WiFi driver program if available.

IP and DNS Configuration on the Internet:

When devices connect to the internet, the IP (Internet Protocol) address and DNS (Domain Name System) configuration play a crucial role. IP addresses allow devices to communicate with each other and the internet, while DNS converts IP addresses to more human-readable domain names for easy recall. In this article, we will discuss how to configure IP and DNS settings on the internet.

IP Address Configuration:

IP addresses are unique numbers that allow devices connected to a network to communicate with each other. To connect to the internet, your device needs to obtain an IP address. IP addresses come in two formats: IPv4 and IPv6. IPv4 consists of four groups of three-digit numbers, while IPv6 uses eight groups of four hexadecimal numbers.

You can configure your IP address by following these steps:

Sponsorlu reklam

a. For Windows Operating System:

1. Open the “Network and Sharing Center” from the Start menu.
2. Right-click on your wireless or Ethernet connection and select “Status.”
3. Click the “Details” button.
4. You will find your IPv4 or IPv6 address in the “IP Address” section.

b. For MacOS Operating System:

1. Open “System Preferences” from the Applications menu.
2. Click on “Network.”
3. Under the “Status: Connected” section, you can find your IP address under the “TCP/IP” tab.

DNS Configuration:

DNS is responsible for converting IP addresses into more user-friendly and easily remembered domain names. While accessing websites or the internet, we usually use domain names instead of IP addresses, but devices communicate using IP addresses.

To configure DNS, follow these steps:

a. For Windows Operating System:

1. Open the “Network and Sharing Center” and right-click on your connection.
2. Select “Properties” and choose “Internet Protocol Version 4 (TCP/IPv4).”
3. Tick the “Use the following DNS server addresses” option and enter the DNS server addresses.

b. For MacOS Operating System:

1. Open “System Preferences” from the Applications menu.
2. Click on “Network” and right-click on your connection, then select “Advanced.”
3. Navigate to the “DNS” tab and add new DNS server addresses.

DNS server addresses are usually provided by your internet service provider or third-party DNS providers. Notable free DNS servers include Google Public DNS and OpenDNS.

The process for IP and DNS configuration may vary slightly based on your operating system, but the general steps are outlined above. By correctly configuring your IP and DNS settings, you can have a more stable and secure internet experience.

Connected to WiFi but no internet access, secured…