TV Says No Signal, What Should I Do?

Mustafa Kemal Erdem
Writer Mustafa Kemal Erdem 13 Minimum Reading
5 No signal problem on satellite
No signal on satellite

The problem of no TV signal occurs most frequently in winter months. The main reason for this is that the dish antenna is covered with snow or the dish moves in extremely windy weather.

Sponsored Ad
Ad imageAd image

When faced with the "No Signal" error on Vestel or Samsung televisions, the solution to the problem usually involves similar steps. To fix such problems, you will just need to follow the steps below. However, specific solutions may be required for a particular television model or connection type.

When faced with a situation where there is no signal on the television, the first thing that comes to mind is to change the direction of the satellite dish. However, the exact solution varies depending on the warnings received. What we need to understand is first to find the factors causing the signal problem. For example, if something like this happens in the winter, it brings to mind certain possible reasons. For example, the satellite dish is covered with snow.

First Checks for No Signal on TV

The first things you will do are for control purposes and there will definitely be places you need to pay attention to. If you're not careful in sensitive areas, you'll likely make the broadcasts worse.

1. Check Cables and Connections:

  • You should definitely check your antenna cable and other input cables.
  • Check that the cables are connected correctly, that the outlet is working properly, and that there is generally no damage. If the cables are loose or broken, this warning will appear. For this, it will be useful to examine the cable signal level.
  • Make sure the input cables are properly connected and there are no short circuits.

2. Adjust Antenna Position:

Sponsored Ad
Ad imageAd image
  • You should check the satellite dish settings of the television and make sure that it is directed to the correct position.
  • Placing the satellite dish near a window or in an open area facing the outside will strengthen signal reception. Make sure there is nothing directly in front of the antenna.
  • If available, check on different devices. If a similar signal is experienced on other devices, the problem is most likely related to the antenna or broadcast part.

4. Perform a Channel Scan:

  • Check if there are any changes in the current channels by searching for the current channels on the television.
  • Use TKGS, automatic channel search or manual channel addition options individually to find new channels and improve the signal.

5. Check Signal Broadcast:

  • If you're using local broadcast or cable, check with your service provider to see if it's an issue.
  • Follow the general steps after investigating temporary problems caused by weather conditions or the relevant broadcast.

6. Resetting to Factory Settings:

  • Try resetting the general settings by returning the television or satellite receiver to factory settings. This process is very simple, especially on devices with TKGS feature.

7. Check for Software Updates:

  • You need to check whether your TV's software is up to date and try to see if there are any problems with the current version. Check the comments to see if anyone else is in your situation.
  • Although updates generally provide solutions to performance problems, they create the opposite situation. There are cases when a smoothly working system causes problems.

What Does No Signal Mean?

No signalis a warning text indicating that a connection cannot be made between the satellite device and the satellite. It is a term used to describe that the connection with the satellite has been lost. From time to time, this warning may appear in channel-based situations. Such situations occur due to dish, cable and broadcasting.

Two types of signal measurement are applied; The first is the indicator showing the connection of the cable, and the other is the signal level showing the level of the signal with the satellite dish. You can get an idea by looking at the relevant areas. This malfunction can generally be caused by the dish or cable. Of course, if the TV or receiver settings have not been changed, there are certain areas you can check.

If you are receiving no signal on Smart TV, it is recommended that you do not take action without reading and analyzing the following. If you think you cannot do it or if you cannot do it, you can take your satellite receiver to a service and see that the problem disappears in a short time.

The basic reasons for such problems are the same in all televisions with built-in satellite receivers. Since old satellite devices do not have TKGS feature, there are usually problems with automatic channel searches. Therefore, automatic channel search is started by typing the Türksat 4A frequency value. Channels that are not on the television are searched by entering the frequency values ​​of the channels.

  • The number that Türksat users who receive a no signal warning will receive support is 8508044444.
  • Digiturk users 2124737373
  • For those who want to watch the video about the transactions, youtube.com/embed/YPEiazW5g-M
  • It will be beneficial for IP TV users to contact the place where they receive service. Assuming internet speed will vary depending on the bit reported for smooth viewing. It will definitely be insufficient in homes with multiple internet uses.

How to Solve No Signal Step by Step

If you have received signal warnings on televisions or satellite receivers, understanding the cause of this problem is the best solution to troubleshoot the problem.

The no signal problem occurs more often in extremely windy or snowy weather. This causes quality drops in the satellite signal. Signal losses occur frequently during unexpected weather conditions.

Unplug your satellite receiver or television, wait and plug it in. Sometimes this simple step solves the signal problem and other problems.

No Signal Solution Steps:

1. Do not waste your time without checking the signal quality and level. If you encounter two reception levels, one is the cable and the other is the satellite signal of the dish

  • There is a possibility that wear and tear on the cables may reduce the signal level.
  • The same situation occurs if the cable length is too long.
  • Poor satellite reception is related to LNB direction, LNB quality, dish quality and direction.

2. Inspect the wall jack and cable.

  • There are two ends in the cable and make sure they do not touch each other. There should be no factors that could cause a short circuit on the part to which the cable is attached. This situation also causes malfunctions in the adapter of the satellite device. Sometimes the satellite receiver malfunctions.

3. LNB, cable and dish factor.

  • Examine the cable or cables in detail.
  • Test by playing with the LNB orientation. Generally, the cable entry is downwards or slightly to the left.
  • The dish needs to be properly assembled and in an area where there is no movement.
  • Quality is very important in the parts used.

4. Rain and snow factor in no signal error.

  • If the bowl is covered with snow, shooting problems will occur.
  • In extremely rainy weather, if there is an opening in the cable entries and cables, problems will occur.
  • In both cases, LNB damage may occur. For this, the place where the cable enters must be well insulated.

5. Testing with an external satellite device and yours in another location.

  • Borrow it from your neighbor or friend and try it.
  • If your suggestion is external, try it in a place where there is a bowl.
  • You can also install it elsewhere by resetting it.

6. What to do in case the settings are tampered with.

  • Check the attached satellite.
  • Check if there are problems with some channels.
  • If necessary, reset to factory setting. Afterwards, if the TV has TKGS feature, use it.
  • Manuel frekans' la test edin. https://www.andronova.net

Things to Check on the Dish Side for No Signal Error

  • Check the signal strength level (cable) and signal quality level (satellite).
  • See cables. If there are attachments, open them and reconnect them. Check all parts from the dish to the TV. Even the inputs may cause a short circuit.
  • Check the dish and LNB.
  • Unplug the dish and TV and wait until they plug them in.
  • If the device is external, test the receiver elsewhere.
  • After the checks, it will be necessary to reset it to factory settings.
  • Signal quality will be affected by slight movements in the dish.

Then see which one has the problem. If there is a problem in both, examine the joints on the cables. Test if there is a connection to the LNB. If you do not have a measuring device, you can test it by connecting a battery to the cable ends. These are the best test steps to be taken with the available resources to address the no signal problem.

TKGS First Installation Recommendation

Enter the area where the satellite settings are located on the TV and look at the indicator showing the reception levels of the cable and the dish. For those looking for where to watch it, it can be done through channel search or satellite installation settings. They are levels in the form of lines side by side or under each other. The brand featured in our articles is usually Philips. Since the menus of different brands such as LG vary, it will be necessary to tinker a little.

If you choose a satellite receiver that supports 4K TKGS (Automatic update system), you will see that automatic channels are automatically included instantly. This situation is generally seen in recently released models of televisions. Let us point out that the feature is really very useful and useful. You can see that all channels are included without any effort.

Among those who want TV recommendations, we recommend that you mostly look at the comments of those who use the relevant models. In the past, Beko / Arçelik maintained its position as the most preferred brand for long periods. Later, Grundig added it to the company. But technology in this field is late, and products of all kinds of brands are now preferred.

Additional Suggestions We Think It Will Be Useful for You to Consider

If there is no signal or no channel, here are some suggestions that we think will be helpful for you to take a look at:

1- If you receive the "No Channel" error on the screen, turn your device off and on. The suggestion is to unplug the device, wait 10 seconds and plug it in.

2- If you have a different satellite receiver, try it with that or try your current one on another satellite dish. (You can try it at services or at your neighbor's)

3- Check the satellite dish, LNB and cables. There may be lack of contact in the cables. Or the two-pronged cable inside the cable may be touching each other.

4- If you use Diseqc, check the cables and terminals on the device. Also take a look at the Diseqc settings.

5- If you are using a dual dish, check if there is a problem with the other satellite.

6- Check the satellite settings. It happens when satellite frequency is removed and a different satellite is selected.

7- Perform the Turksat 4A satellite installation again. If there is a problem, reset it to factory settings.

Note: If all channels are missing or there is no signal when you re-install, as a suggestion, delete all channels and then perform the satellite installation. Also, Seg and Axen TV consist of similar menus.

Making Channel Settings for Smart TV

We wanted to explain the path of those who have problems with Samsung TV such as no or weak signal, through the example model. Of course, we always recommend testing the satellite dish with an external device for testing. The ends of the cables also have a place between this control.

YUMATU Turksat 4A satellite addition 1
Adding satellites and searching for channels when there is no signal

When you enter it in the menu area, select "Satellite or Installation" and then "Satellite Channel Scan" or "Search". “Network Scanning” section “Open" will be. Scan typewithout password/ will be selected as all. In the last step “Transponder” hover over “OKYou need to press the ” button.

Frequency values ​​for automatic search:

  1. Frequency 11844 MHz / Polarization Vertical / Symbol rate 2222 / FEC 3/4.
  2. Also, if the above does not work, try 12034 V 27500. TVs generally provide this value setup.
  3. 12380 V Symbol 27500
  4. 12423 H S. 30000

There are multiple installation frequencies in the figure. You can process these separately with your experience.

What does no signal error mean? No signal solution
What does no signal error mean and what is the solution?

Let us emphasize that the illustrated explanation is given as an example. You may encounter variable setting structures. We are in favor of definitive testing of alternative frequency information. For example, when we tried it on an old model, it caused the presence of wings other than the standard ones.

How to solve no signal on satellite?
The TV says there is no signal, what should I do?

If there are missing channels in the automatic channel search via satellite, the frequency information is used to add the channels to the television one by one, as you can see in the example image. You will access this list on Turksat's website.

When the message Next and Sunny shows no signal or no channel, test it by manually adding channels through similar menus.

In the content, the first thing we do is the analysis and then we include the step by step steps towards the no signal solution. Before doing something, do not attempt things that will cause bigger problems.

No signal on satelliteWe hope that our comprehensive article on this error has solved your problem.

Next:Some channels on TV are not receiving

No signal on satellite
No signal problem on satellite 5
Reasons for no signal on TV 5
First checks for no signal error 5
Solving no signal problem 5
To follow:
He is someone who has worked in many fields related to technology for many years and closely follows the developments in his field of work.
5 Reviews
  • Hakan says:

    Sinyal sorunu zaman zaman çanak anten kaynaklı olurken bazen de kablo ve ayarlarla alakalı olabiliyor ancak çoğunlukla kış aylarında çanak oynamasına veya kar kaplamasına bağlı ortaya çıkmakta

  • Ahmet Sadık says:

    Kış geldi sinyal yok hoşgeldi bakalım kar yağışı mı yoksa rüzgar mı etkileyecek

  • Uğur Can says:

    Bir kaç önemli kanalda sinyal zayıf veya yok yazıyor bu bazen nadir çıkıyor.

  • Andronova says:

    Merkezi sistemli bir evde oturuyorsanız sistemin kontrolü, çanak kontrolü ve kablo. Bu durum sadece kış aylarında ortaya çıkıyorsa, çanak kontrolü gerekiyor.

  • Mehmet Yılmaz says:

    Hele şükür yaz geldi de şimdilik sorun yaşamıyoruz.

Leave a review

Your email address will not be published. Required fields*They are marked with